Surveying with ReachView
The most user-friendly software for data collection that is available for both Android and iOS. With ReachView, you can collect and stake out points and control all the features of Reach receivers, such as setting up a base station, logging RINEX data, and configuring NMEA output.
Point collection: create projects, save points, and export in industry standard formats
Record each position as a point with centimeter precise coordinates. Export projects and open them in GIS or CAD software like AutoCAD, ArcGIS, QGIS, and others.
DXF, CSV, GeoJSON, ESRI Shapefile
Stakeout: Find points' position on the ground
Stakeout is used to find exact physical locations of points. They can be collected in ReachView or imported from other CAD or GIS software.
Process of stakeout in ReachView has two steps: map view and bulls-eye. Map's purpose is to help you navigate to points on long distances. When you get closer than 40 cm to the point, bulls-eye turns on to make it easier for you to visually match receiver and point.
CSV, DXF and GeoJSONs
Logging in RINEX: record raw data, position, and base correction logs
Record raw data, position and base correction logs. Point collection and recording of RAW data are independent processes and can be used simultaneously. ReachView has a simple and intuitive interface for logging configuration and control.
We provide our version of RTKLib for PPK. It’s free and can be downloaded from our docs.
of logging at 1 Hz
Real-time position Streaming in NMEA
Reach provides data in standard NMEA that is used by most GIS apps. Simply connect your device to Reach over Bluetooth or with a cable, and turn on “Position output” in ReachView.
Reach can turn on and off automatically
Reach can turn on and off in sync with an external battery connected over RS-232. This helps when the power button is hard to reach, for example, if the receiver is placed on the roof of a tractor.
MachineryGuide, AgriBus-Navi, Efarmer, Agripilot, and others
RS-232, TCP, Bluetooth
NTRIP or another Reach as a base station
Reach RS+ needs a base station as a source of corrections. That’s a requirement for centimeter accuracy in RTK and PPK. The base might be another Reach RS+ receiver or an NTRIP service. VRS is also supported.
Reach RS+ works seamlessly with other Reach receivers over any link.
Input and output corrections
TCP, LoRa, Bluetooth, RS-232, NTRIP
Max distance from a base
Up to 10 km in RTK
20 km in PPK
Reach RS+ is designed for harsh conditions.
Dense forests, mountains, frost, heat and water, Reach can handle it all
Can be held 1 meter deep underwater for half an hour.
Working temperature. Isn’t afraid of either heat or cold.
Industrial LiFePO4 battery that doesn’t die when cold. Charges over USB from a powerbank.
|Operating tº||-20…+65 ºC|
|Ingress protection||IP67 (water and dust)|
|Autonomy||Up to 30 hrs|
|Battery||LiFePO4 3.2 V|
|External power input||6–40 V|
|Charging||MicroUSB 5 V|
|Static horizontal||5 mm + 1 ppm|
|Static vertical||10 mm + 2 ppm|
|Kinematic horizontal||7 mm + 1 ppm|
|Kinematic vertical||14 mm + 2 ppm|
Up to 8 km
|Position output||NMEA, LLH/XYZ|
|Data logging||RINEX with events with update rate up to 20 Hz|
|Internal storage||8 GB|
|Signal tracked||GPS/QZSS L1,
Galileo E1, SBAS
|Number of channels||72|
|Update rates||14 Hz / 5 Hz|
Standalone Reach Rs+
- 1x Reach RS+ with full package
Survey Kit Reach
- 2x Reach RS+ with full package
Delivering TRUST to our clients
EXPERTISE in commercial and technical aspects
WARRANTY and support guaranteed for all products
If you require any additional information, please do not hesitate to contact us.